WCM300aa Ceiling/ Wall Mount Style
QNO WCM300aa is the access point which specially designs for big and complex space. The model contains the 5dBi directional antenna with less interference to ensure every corner has signal. It complies with IEEE802.11b.g.n standard; transmission rate reaches 1 gigabit which provides fluent flow for browsing websites or download. The model can be installing in two ways, ceiling and wall mount style. Users can install it base on their need, also, it is designed in simple pure white to match with all types of interior design.
CM300aa applies the IEEE802.3AT/AF high capability PoE function. Not only it supports power over Ethernet but also support powering on LAN port to achieve power bridge effect. Therefore, WCM300aa can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost.
In addition, WCM300aa complies with CAPWAP (RFC 5415、RFC 5416) protocol and support access point controller to do unified central management. Remotely monitoring AP status, upgrade software and even user bandwidth management can also be managed easily.
High Speed Gigabit Model
- Transmission rate reaches 1 Gbps which provide users fluent internet access, such as VOIP, media download, transfer files...etc.
Flexible PoE Function
- It supports IEEE802.3at/af PoE function and power supply from one of LAN. Also, it could be connected in order to achieve power bridge effect. Therefore, WCM300aa can save space, reduce cables and eliminate the requirement for the dedicated electrical outlets to lower the installation cost.
- Users can choose to place it on ceiling or wall depends on its environment. The model complies IEEE802.3af, contains PoE and DC power supplies. Greatly suitable for enterprises, hotels and malls which give power supply without changing it electrical layout.
Enterprise Level Software and Hardware
- The model is aiming for providing enterprise level internet coverage. It uses wireless internet chipset and complies with IEEE802.11b/g/n protocol to satisfy user with high flow demand.
Efficient Transmission Rate
- WCM300aa has two 5dBi directional antennas with less interference and wide coverage. The transmission rate achieves 300Mbps and compatible with IEEE802.11b/g/n devices.
Multi-Function Access Point Management
- VLAN group management and four sets of SSID are able to assist users to design network structure in which could divide network as internal and external usage and isolate document. It also contains AP roaming which means users could not notice AP transfer; seamlessly transfer from one AP to other APs that under WLAN.Access Point Controller with its central management function enable to do unified management：
- The center one could manage setup, assignation to all APs.
- Remotely monitoring AP status and condition.
- Through APC's MAC ACL function to manage APC.
- Support function of disable SSID broadcast.
- Through APC to process firmware upgrade remotely.
- QNO APC supports variety types of encryption and security system.